Adding / Modifying a User

How do I add / modify a user?

1. Press the Power On/Off key.
2. Enter your [ MASTER CODE ]. When a number on the keypad is lit, the user is already programmed.
3. Select a user by entering a 2-digit user number (01 to 32). “Arm” flashes. “Sleep” flashes.
4. Enter a 4- or 6-digit [ USER CODE ].
5. Confirm the [ USER CODE ]. “Stay” flashes.
6. To register a remote, press and hold any remote button for 3  seconds. Release. Press and hold any remote button for 3 seconds. If you do not wish to assign a remote, press [ ENTER ].
7. To program another user, go to step 3. To exit, press [ CLEAR ]. For partitioned systems, continue to step 8.
8. Press [1] and/or [2] to assign the user to a partition.
   Press [ ENTER ]. To program another user, go to step 3.
   To exit, press [ CLEAR ].

Deleting a User

How do I delete a user?

1. Press the [ Power On/Off ] key.
2. Enter your [ MASTER CODE ].
3. Select a user by entering a 2-digit user number.
4. Press and hold the [ SLEEP ] key until you hear the confirmation beep.